Changing The Card Insertion Parameters - Epson ActionNote 866C User Manual

ATA * card configuration options
Option
Try Primary ATA Address**
Try Secondary ATA Address
Try Any Linear ATA Address
* Includes both ATA flash cards and ATA rotating-media cards.
** Select this option only when you know that no other disk installed on your
computer uses the primary ATA address.
Note
When you enable all three of the ATA card configuration
options, the software uses whatever addresses are available.

Changing the Card Insertion Parameters

Normally, your system beeps when you insert or remove a
card or when you have a configuration conflict. When you
select the Edit Configuration option from the File
pull-down menu, you see the Edit Configuration menu. This
menu contains the Card Insertion Parameters option,
which allows you to specify beep criteria for your system.
Note
If you change these parameters, make sure you select the
Save Configuration option from the File pull-down
menu to save your changes.
3-6
Using CardSoft
Function
Configures ATA cards using the
standard primary ATA addresses
Configures ATA cards using the
standard secondary ATA addresses
Configures ATA cards using the
linear-address mode available on
most cards