Checking The Hardware Installation - HP Model 705 - Workstation User Manual

Troubleshooting and Removal/Replacement Procedures
H/W Path
============================================
8
8/0
8/0.0
8/0.0.0
8/0.5
8/0.5.0
8/0.6
8/0.6.0
8/12
8/12/5
8/12/5.3
8/12/5.3.0
8/12/5.4
8/12/5.4.0
8/12/5.6
8/12/5.6.0
10
10/12
10/12.4
10/12.4.0

Checking the Hardware Installation

Perform the following steps to check the hardware installation:
CAUTION: The DDS-2 drive is susceptible to mechanical and electrostatic
shock. When handling the drive, always wear the static strap that
came in the DDS-2 drive kit. Always handle the drive carefully.
1.
Check that the SCSI-2 terminator is connected to the single-ended SCSI-2 port on
the rear I/O panel of the system unit (if there are no external SCSI-2 devices), or
that the last external single-ended SCSI-2 device is terminated.
3–4
Class Description
bc
bc I/O Adapter
ext_bus GSC built-in Fast/Wide SCSI Interface
target
disk QUANTUM LPS1080WD
target
disk DEC
target
disk DEC
ba Core I/O Adapter
ext_bus Built-in SCSI
target
tape HP C1533A
target
disk SEAGATE ST3600N
target
disk MICROP
bc I/O Adapter
ext_bus GSC add-on Fast/Wide SCSI Interface
target
disk SEAGATE ST31200W
DSP3210SW
DSP3210SW
2112