Advertisement
CLEARANCES AND DIMENSIONS
• Dimensions that are shown in Figure 1 (for 24") or Figures
3 and 4 (for 30") must be used. Given dimensions provide
minimum clearance. Locate electrical outlet in the shaded
area in the upper left-hand corner of the cutout. See Figure 7.
• Contact surface must be solid and level. Pay special attention
to the floor on which the Microwave Drawer will sit. The
floor of the opening should be constructed of plywood
strong enough to support the weight of the oven (about 100
pounds).
24" MICROWAVE DRAWER MEASUREMENTS
Electrical outlet location
22 1/8"
opening
Allow 7/8"
overlap.
23 1/2"
min depth
36"
countertop
height
24"
cabinet min.
Figure 1
Figures 1 and 2 contain many Microwave Drawer measurements
for reference when planning the drawer's location.
4 11/16"
1 23/32"
15 13/32"
Figure 2
• Check location where the Microwave Drawer will be
installed for proper electrical supply.
• Your oven can be built into a cabinet or wall by itself or
under a gas or electric wall oven.
• Be sur e that the clearance of the floor between the wall oven
and the microwave drawer is a minimum of 2-inches.
• The microwave interior will easily accommodate a 9" x 13"
oblong dish or a bag of microwave popcorn.
(6")
5"
4"
Allow 3/16"
overlap.
14 13/16"
opening
Allow 7/8"
overlap.
Allow
7/16"
overlap.
19" to top
of floor
21 19/32"
15"
auto drawer
opening
1 13/16"
door thickness
23 7/8"
2
Anti-Tip
block
3 1/2"
14 13/16"
to bottom
of Anti-Tip
block
Floor must
support 100 lbs.
14 19/32"
23 3/8"
Advertisement
