Advertisement
30" MICROWAVE DRAWER MEASUREMENTS
84"
wall
cabinet
Electrical outlet
location
4"
28 7/16"
opening
Allow 3/4"
overlap.
23 1/2"
min depth
30"
cabinet min.
Figure 3
ANTI-TIP BLOCK
NORMAL INSTALLATION STEPS
ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS
To reduce the risk of tipping of the drawer, the Anti-Tip block
must be properly installed located 14 3/4-inches above the floor
on which the Microwave Drawer will sit. The 6-inch Anti-Tip
block must be provided by the installer. See Figures 1 and 6 (for
24") or Figures 3, 4 and 6 (for 30"). The Anti-Tip block prevents
serious injury that might result from spilled hot liquids.
If the Microwave Drawer is ever moved to a different location, the
Anti-Tip block must also be moved and installed. When installed
to the wall, make sure that the screws completely penetrate the
dry wall and are secured in wood or metal so that the block is
(6")
5"
2" min.
14 13/16"
to bottom
Allow 1/4"
of Anti-Tip
overlap.
block
14 3/4"
opening
Allow 3/4"
overlap.
Allow
Floor must
7/16"
support 100 lbs.
overlap.
19" to top of floor
(recommended)
Electrical outlet location
Electrical outlet
location
Allow 3/4"
overlap.
36"
countertop
height
Optional
wall oven
cutout
illustrated
in sketch
Anti-Tip
block
3 1/2"
Figure 4
Figures 3, 4 and 5 contain many Microwave Drawer measurements
for reference when planning the drawer's location.
15 13/32"
Figure 5
totally stable. When fastening, be sure that the screws do not
penetrate electrical wiring or plumbing.
5"
4"
Figure 6
3
5"
4"
28 7/16"
opening
Allow 1/4"
23 1/2"
Allow 3/4"
min depth
overlap.
19" to top of floor
30"
cabinet min.
28 1/8"
4 11/16"
2"
30"
6"
Anti-Tip
block
3 1/2"
14 13/16"
to bottom
of Anti-Tip
overlap.
block
14 3/4"
opening
Allow
Floor must
7/16"
support
overlap.
100 lbs.
(recommended)
14 3/4"
15"
auto drawer
opening
23 3/8"
(6")
Anti-Tip
block
Advertisement
