Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual page 102

Button Labels
Table 12 Feature Button Definitions (continued)
Button
Record
Release and Ans
Release Call
SD or Customized
Button
Spd Dial Lng Pause
Spd Dial Pause
Start
Sub
Tel Set Music
Tone Dial Select
Unlock Door
Strata CTX DKT3000/3500-Series Digital Telephone October 2002
Record to Voice Mail – Press to record current conversation to voice mailbox.
Release and Answer – Press to disconnect or complete the transfer the current outside or
extension call and automatically answer the new incoming outside or extension call.
Release – Press to disconnect or complete the transfer of the current outside or extension
call and to place your station in the idle condition.
Speed Dial – Press to Speed Dial a telephone number or feature access codes. SD
buttons can be used as either System Speed Dial numbers or Station Speed Dial
numbers.
Pause (Long) – Press to insert a 10-second pause when programming Speed Dial
numbers.
Pause – Press to set either a one-half or two-second pause when programming Speed
Dial numbers. (The pause time is set in system programming).
Start – Press to make an outgoing call using an ISDN trunk.
Sub address – Press to enter a sub address on an ISDN trunk outgoing call.
Background Music – Press to turn Background Music on or off over your station speaker.
Tone – Press to change the outgoing dialling of the outside line in use from dial pulse to
tone signalling.
Door Unlock – Press to unlock a door lock mechanism.
Definitions
Delayed Ringing
89