Labeling Feature Buttons - Toshiba DKT3220-SD - Digital Phone - Charcoal User Manual

Labeling Feature Buttons

From the Softphone Setting window, you can change six telephone button labels on a
PDA and 10 on a PC. Changing the label does not change the function. To change the
function, see
Note
To find out what features are assigned to the feature buttons
1. Dial
2. Click on
programmed feature.
Note
3. To exit user programming mode, wait 15 seconds and programming mode will exit
automatically.
Strata CIX and CTX IPT/DKT Telephone
Downloaded from www.Manualslib.com
"Programming Feature Buttons" on page
If the headset-use feature is enabled, Line 5 (PDA) and Line 9 (PC) is set as
default and will automatically be labeled headset.
#9876
to enter user programming mode.
HOLD
, then click on each individual feature button to see the currently
If you reprogrammed the button functions per the instructions in the user guide,
you cannot manually exit from "programming mode." Just wait a few seconds
for the system to time out and the SoftIPT will return to idle.
08/05
manuals search engine
The Basics
Basic SoftIPT Functions
109.
29