Toshiba DKT3220-SD - Digital Phone - Charcoal User Manual page 63

To park a call
1. While on a call, press
...or
an extension during the call, and you have line button on your telephone, the line
LED will flash until the call is picked up (depending on programming).
2. Specify the Park Orbit using one of the following:
• Press
• Enter a valid extension.
• Press
3. Hang up. The caller's extension or line number and the orbit number are shown. If
the parked call is not retrieved within a specified time, the call rings back to your
telephone. When a parked call recalls your telephone, the LCD shows the line or
extension that is recalling and the orbit number.
To retrieve a parked call
1. Press
...or press your extension button +
2. Enter the Orbit Number where the call is parked or
you are calling. You cannot use
flashes at the in-use rate when the call is retrieved.
Strata CIX and CTX IPT/DKT Telephone
Downloaded from www.Manualslib.com
Park in Orbit
Cnf/Trn #33
+ . The LED flashes green (consultation-hold). If you were on
*
and the system automatically selects a General Park Orbit between
7000 7019
~ . The chosen orbit appears on the LCD.
#
and the system automatically selects your extension as the orbit.
Park in Orbit
08/05
manuals search engine
#32
.
#
for the extension from which
*
to retrieve a parked call. The extension LED
Advanced Operation
Call Park Orbits
49