Installing the FWD SCSI Adapter
7. Verify the operation of the FWD SCSI adapter.
To verify that your system recognizes the FWD SCSI adapter, follow these steps:
a.
Turn on and boot the system, and log in as root or superuser.
b.
In a terminal window, enter the following command:
/etc/ioscan –C scsi
/usr/sbin/ioscan –C ext_bus
After a few moments the ioscan utility lists all of the bus interfaces it could find.
The list appears similar to the following:
For HP–UX 9.x:
H/W Path Description Status
=============================
2.0.1
2.0.7
For HP–UX 10.x:
H/W Path
====================================
8/8
8/12/0
8/12/5
If ioscan does not find your FWD SCSI adapter, go to Chapter 3, "Troubleshooting".
2–10
Enter
scsi
ok(0x7071)
scsi
ok(0x707c)
Class
ext_bus
GSC add–on Fast/Wide SCSI Interface
ext_bus
Built–in Parallel Interface
ext_bus
Built–in SCSI
(for HP–UX 9.x)
(for HP–UX 10.x)
Enter
Description