Table of Contents
Advertisement
Figure 10–2
10.1.2.1
Managed Unit Status
The Managed Unit Status screen is shown in Figure 10–2. The status of the JBOD enclosure
hardware components is shown in the parentheses next to the listed item. Please note that,
depending on the enclosure you are using, the list of managed components may be different.
Below is just a sampling of the JBOD enclosure elements that are managed.
SES (CH 2, ID 105)
•
and ID are not unique to the SES, rather the SES is connected through one of the hard drives
in the JBOD enclosure.
Power Supply 0/1
•
If a PSU has failed or been removed, error messages will be shown.
Fan 0/1
•
or been removed, error messages will be shown.
Temperature Sensor
•
show the temperature and whether or not the temperature of the JBOD enclosure is in the
safety range. If the temperature has failed or been removed, error messages will be shown.
Managed Unit status
: The parentheses next to SES show a Channel (CH) and ID number. The CH
: If the PSUs are functioning normally a message indicating this will be shown.
: The status message shows the operating speed of the fans. If a cooling fan has failed
: If the temperature sensor is operating normally the status message will
System Monitoring
137
Advertisement
Table of Contents
