Table of Contents
Advertisement
Altos RAIDWatch User Guide
7
If you accepted the License Agreement in Figure 2–2, a new window with three installation options
will appear. These options, shown in Figure 2–3, are Out-Band, In-Band, and Applet Only.
Figure 2–3
16
• Out of Band: Selecting this option allows you to install the Altos RAIDWatch GUI and the
Event Monitor on the local computer. If this option is selected then none of the primary or
secondary agents will be installed and it will be necessary to access the controller through
a LAN.
• In-Band: Selecting this option will result in the installation of the In-Band SCSI driver and
associated agents and configuration tools as well as the Altos RAIDWatch GUI on the local
computer. This option should only be selected when the controller is connected directly to
the local computer via the serial port.
• Applet Only: This will install the GUI onto the controller itself. Prior to selecting this option,
a user must reserve space on the controller. After the space has been reserved, and if this
installation option is selected, then the associated Altos RAIDWatch files will automatically
be installed on the controller.
If the Applet Only installation was selected, a user will have to use a web browser to
connect to the Altos RAIDWatch program. To do this, a web browser is opened and the
controller IP address entered. The Altos RAIDWatch program can then be accessed and use
to manage the storage array.
Installation Options
Advertisement
Table of Contents
