Table of Contents
Advertisement
28
Installation
DateTime
3
•
Time Server: Select time setting method.
-
Auto: Set the time server automatically.
-
Manual: Set the time server manually. Usable NTP server is as shown below.
NTP Server
time.nist.gov
time-a.nist.gov
time-b.nist.gov
ntp.nasa.gov
clock.isc.org
time.bora.net
•
Time Server Address: Enter the IP address or hostname of the time server. This option is activated when you set to manual in the [Time
Server] setting menu.
•
Date Format: Select the display format for date.
•
Daylight Saving: Set the daylight saving time.
1. Press the [OK] button and then Daylight-saving time setting menu will be displayed.
2. Mark up to set the daylight saving function.
3. Set the Daylight Saving start time.
4. Set the Daylight Saving end time.
5. Press the [OK] button to confirm the setting. After setting, the Daylight Saving option is set to On.
•
Time Zone: Select your time zone for the system.
IP address
192.43.244.18
129.6.15.28
129.6.15.29
198.123.30.132
204.152.184.72
203.248.240.140
Advertisement
Table of Contents
