36
Installation
•
IEEE802.1x:
-
Disable: Not used this function.
-
Enable: Select this option to user 802.1x authentication. If you select this option, the Anonymous Identity, Identity, Password and
EAP Method options are enabled.
•
Identity: Enter Identity name given by your IT administrator. Specifies the system's identity used for 802.1X authentication.
•
Password: Enter password given by your IT administrator. Specifies the system's password used for 802.1X authentication.
•
EAP Method: Select the EAP method.
NOTE
When user use EAP-MD5
If you use EAP-MD5, you do not need to upload any files in the web service.
3
When user use EAP-TTLS
1. If you use EAP-TTLS, you must receive ca.pem, client.pem, client.key from 802.1x manager.
2. Upload ca.pem, client.pem, client.key file in the web service of RVF1000 like picture.
When user use EAP-PEAP
1. If you use EAP- PEAP, you must receive ca.pem from 802.1x manager.
2. Upload ca.pem file in the web service of RVF1000 like picture.
After Setting 802.1x
1. If you finish setting, you confirm that you can see your setting IP in main screen.
2. Conduct ping test in the system info > Network utility > ping.
3. You attempt call to other RVF1000.