Cisco CTS-3010 Administration Manual page 200

Managing Hardware Setup
You must specify the table shape before you can perform camera and microphone testing on the
Note
CTS 1300.

The table must be a minimum of 7 feet wide and 9 feet long.
Figure 7-2
To specify the shape of the table in the room, follow these steps:
Log in to the Cisco TelePresence System Administration window.
Step 1
Choose Troubleshooting > Hardware Setup.
Step 2
Click the Configuration radio button.
Step 3
Click Start in the Testing box. The Table Configuration setup window appears.
Step 4
Step 5 Select the table type from the drop-down menu:
• Short Racetrack Table
• Long Racetrack Table
• Short Straight Table
• Long Straight Table
• Round Table
Square Table
•
Cisco TelePresence System Release 1.6 Administration Guide
7-4
Cisco CTS 1300 Table Configuration Menu
Chapter 7 Troubleshooting the CTS 1300
OL-13676-04