Encryption - Bosch VIP XD Installation And Operating Manual

48 en | Configuration Using a Web Browser
SNMP traps
You can select which traps are to be sent.
1.
2.
3.
Authentication
If a RADIUS server is employed in the network for managing access rights, authentication
must be activated here to allow communication with the unit. The RADIUS server must also
contain the corresponding data.
To configure the unit, you must connect the VIP XD directly to a computer using a network
cable. This is because communication via the network is not enabled until the Identity and
Password parameters have been set and successfully authenticated.
Identity
Enter the name that the RADIUS server is to use for identifying the VIP XD.
Password
Enter the password that is stored in the RADIUS server.
RTSP port
If necessary, select a different port for the exchange of the RTSP data from the list. The
standard RTSP port is 554. Select Off to deactivate the RTSP function.
5.20

Encryption

A special license, with which you will receive a corresponding activation key, is required to
encrypt user data. You can enter the activation key to release the function on the Licenses
page (see Section 5.22 Licenses, page 51).
DOC | V4.0 | 2009.06
Click Select. A list is opened.
Click the checkboxes to select the required traps. All the checked traps will be sent.
Click OK to apply the selection.
Installation and Operating Manual
VIP XD
Bosch Security Systems