Table of Contents
Advertisement
VideoJet X10
5.38
Advanced Mode: Network
The settings on this page are used to integrate the VideoJet X10 into an existing network.
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1.
2.
Bosch Security Systems
Make the desired changes.
Click the Set and Reboot button. The VideoJet X10 is rebooted and the changed settings
are activated.
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
77
Advertisement
Table of Contents
