Connect To An A/V Receiver - D-Link DSM-312 User Manual

Section 2 - Installation

Connect to an A/V Receiver

Follow the steps below to connect and install your MovieNite™ Plus Media Player to an A/V receiver*:
Step 1
Connect an HDMI cable (not included) to the HDMI port on the DSM-312 and the other end into an available HDMI input port
on your receiver. Note that HDMI is required for HD resolution. If you are unable to connect using an HDMI cable, connect the
supplied A/V cable into the AV port on the DSM-312 and the other end into the correct matching input ports on your receiver
(yellow is for video, red and white are for audio).
AV HDMI LAN DC 12V
HDMI
Step 2
Power on your TV and your receiver. Select the correct video output on your TV and correct input/mode on your receiver.
* Please refer to your A/V receiver's user manual for more information if you are unsure about how to connect and operate your receiver.
D-Link DSM-312 User Manual 10