D-Link DSM-312 User Manual page 15

Section 2 - Installation
Step 3
Connect an Ethernet cable (not included) to the LAN port on the DSM-312 and other end into your network (via router, gateway,
or switch). If you want to use the built-in wireless adapter, do not connect the Ethernet cable. The on-screen setup wizard will
allow you configure your wireless settings (refer to Step 6 for wireless setup information).
Step 4
Connect the supplied power adapter to the power receptor on the DSM-312 and plug it into a power outlet or surge protector.
The device will power on.
D-Link DSM-312 User Manual
RESET
1 2 LAN 3 4 INTERNET USB
5V - - - 3A
AV HDMI LAN DC 12V
AV HDMI LAN DC 12V
11