Toshiba DF02A - Day/Night Mini-Dome Color Camera CCTV Instruction Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Security Camera
  5. DF02A - Day/Night Mini-Dome Color Camera...
  6. Instruction manual

Toshiba DF02A - Day/Night Mini-Dome Color Camera CCTV Instruction Manual

Instruction manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DOME CAMERA
IK-DF02A
Please read this manual thoroughly before use, and keep it handy
for future reference.

TABLE OF CONTENTS

10. SPECIFICATIONS ........................................................ 19
11. EXTERIOR VIEW ......................................................... 20
Downloaded from
www.Manualslib.com
IMPORTANT SAFEGUARDS ........................................ 1
1. FEATURES AND DESCRIPTION ................................. 4
2. COMPONENTS ............................................................ 4
3. PART NAMES AND FUNCTIONS ................................ 5
4. CONNECTIONS ........................................................... 6
5. INSTALLATION ............................................................. 8
6. BACKLIGHT COMPENSATION (BLC) ......................... 16
7. LINE LOCK PHASE ...................................................... 16
8. NOTES ON USE AND INSTALLATION ........................ 17
9. IN CASE OF PROBLEMS ............................................ 18
For information on the latest our products and peripheral devices, refer to
the following Web page.
http://www.ipvideo.toshiba.com
The above URL is subject to change without prior notice. If the URL changes,
refer to the Toshiba website
(http://www.toshiba.com.)
manuals search engine
INSTRUCTION MANUAL
ZEIM-4000100G A.1
Record in space provided below the Model # and
the Serial # as found on the label on the bottom of
this unit.
Model # IK-DF02A
Retain this information for future reference.
Serial #

Advertisement

Table of Contents
loading

Related Manuals for Toshiba DF02A - Day/Night Mini-Dome Color Camera CCTV

Summary of Contents for Toshiba DF02A - Day/Night Mini-Dome Color Camera CCTV

  • Page 1: Table Of Contents

    For information on the latest our products and peripheral devices, refer to the following Web page. http://www.ipvideo.toshiba.com The above URL is subject to change without prior notice. If the URL changes, refer to the Toshiba website (http://www.toshiba.com.) Downloaded from www.Manualslib.com...

  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read Instructions 13. Lightning All the safety and operating instructions should be For additional protection on this video product during read before the product is operated. a lightning storm, or when it is left unattended and 2. Retain Instructions unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable The safety instructions and instruction manual should...
  • Page 3 • The CAUTION label, shown on the left, is attached on the camera. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightening flash with arrowhead WARNING : symbol, within an equilateral triangle, TO REDUCE THE RISK OF FIRE OR...

  • Page 4: Protection Of Personal Information

    5. Repairs or modifications made by the user or caused to be made by the user and carried out by an unauthorized third party. 6. Notwithstanding the foregoing, Toshiba’s liabilities shall not, in any circumstances, exceed the purchase price of the product.

  • Page 5: Features And Description

    1. FEATURES AND DESCRIPTION 1. 24V AC/12V DC dual-voltage capability extends power options. 2. Camera has the ability to automatically switch to color in daylight or black and white at night. 3. Camera synchronization mode is selectable between internal and line lock. 4.

  • Page 6: Part Names And Functions

    3. PART NAMES AND FUNCTIONS Power Input Wire Connect the power cable to 24V AC or 12V DC. Length: approx. 12 inches (300mm) Video Wire (BNC Tap) Connect the video cable to a monitor or video device. The image is outputted when Pan ADJ Screw powered on.

  • Page 7: Connections

    4. CONNECTIONS Notes on connecting • Power plugs of connected equipment must be disconnected before camera installation. • A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required for standard connection. • For details of wiring and operation of equipment to be connected, refer to their operation manuals.

  • Page 8: Line Lock Control

    4-2. Line lock Control • Matching the vertical synchronization with the power frequency is called the Line Lock. • To activate the line lock, set the LL switch to ON. 2 3 4 Line Lock • When two or more cameras are switched by the video switcher for viewing with a display monitor the vertical synchronization phase can be locked to the power frequency for a stable vertical synchronization.

  • Page 9: Installation

    5. INSTALLATION Note: The attached screws are used to install the camera to a solid surface. If installing to surfaces of loose or thin materials, use the appropriate anchors (not included) with the screws. 5-1. Installing the Camera 5-1-1. Tamper Resistant Feature Enabling the Tamper Resistant Feature 1.
  • Page 10 To Determine Which Set of Mounting Holes to Use There are two different sets of mounting holes (i and ii). The set to use depends if the camera is being mounted to a switch box or not and to a wall or ceiling.
  • Page 11 4. Fasten all the screws. Note: Verify that the word "TOSHIBA" is on the visible side. When mounting on a wall, orient the camera to face the unlock-button. (i) Rerouting the Wires for Flush Mounting the Camera...
  • Page 12 B: Routing the Wires to the Left Side 1. Remove the wires from the wire Upside hole and position them to the left of the base. 2. Firmly secure the wires with the wire tie. Do not overtighten the wire Wire Hole tie.
  • Page 13 5-1-3. Installation to a Switch Box (i) Mounting the Camera to a Switch Box Positioned Normally on a Wall 1.81(46) Switch Box Upside 3.29(83.5) Dimensions: inch (mm) 1. Install the switch box. 2. Set the "Upside" on the base to Mounting Screw x 4 the up position.
  • Page 14 (ii) Mounting the Camera to a Switch Box Positioned Sideways Switch Box Upside 3.29(83.5) 1.81(46) Dimensions: inch (mm) Mounting Screw x 4 (not supplied) 1. Install the switch box positioned sideways on a wall. 2. Attach the four mounting screws to the switch box.
  • Page 15 (Refer to section 5-1-3 (i) or (ii).) 3. Attach the camera to the switch box with the four mounting screws. Note: Verify that the word "TOSHIBA" is on the visible side. Mounting Screw x 4 (ii) (not supplied)

  • Page 16: Adjusting The Viewing Angle

    5-2. Adjusting the Viewing Angle Tilt rotation 5Focus Lock Lever Far ( ) Tele 2Tilt Lock Near Horizontal Wide rotation 3 Zoom Lock 4 Horizontal 1Pan Lock Lever ADJ Ring Top mark 2Tilt Lock To Monitor (1) To check the video image on the monitor, connect the "Monitor Out Harness Wire" to the connector "MON".

  • Page 17: Backlight Compensation (Blc)

    6. BACKLIGHT COMPENSATION (BLC) To activate backlight compensation, set the BLC switch to ON. 2 3 4 When the automatic electronic iris feature is used with an auto iris lens, the exposure adjustment is automatically performed so that a best picture is obtained at a monitor zone of about 50% in horizontal and about 50% in vertical direction.

  • Page 18: Notes On Use And Installation

    8. NOTES ON USE AND INSTALLATION • Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. • Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen.

  • Page 19: In Case Of Problems

    9. IN CASE OF PROBLEMS Condition Check Points No image • Are the camera and connected equipment turned on? • Is the mode setting switch DC/AES set to OFF? Be sure to set to ON. • Are wires connected correctly? Unnatural color •...

  • Page 20: Specifications

    10. SPECIFICATIONS 1. Image System Image Device 1/3 inch CCD image sensor Pixel Elements 768 (H) x 494 (V) 2. Electrical TV System 2:1 Interlace, 15.734 KHz horizontal, 59.94 Hz vertical Horizontal Resolution 520 TV lines S/N Ratio 50 dB Minimum Illumination 0.5 lux (More than 10 % of image output, Smoke cover)

  • Page 21: Exterior View

    11. EXTERIOR VIEW 1.81 (46) 5.08 (129) (3.29 (83.5)) 5.08 (129) Dimensions: inch (mm) - 20 - Downloaded from www.Manualslib.com manuals search engine...
  • Page 22 1.81 (46) depth about 1.58 (40) Wall 3.94 (100) Screw ( 0.18 (4)) x4 - TP4 x37 1.81 (46) Dimensions: inch (mm) - 21 - Downloaded from www.Manualslib.com manuals search engine...
  • Page 23 MEMO - 22 - Downloaded from www.Manualslib.com manuals search engine...

  • Page 24: Limited Warranty

    Product, if it does not perform as warranted. In order to take advantage of this Limited Warranty. You must: (a) call (877) 855-1349 to receive a RMA number: and (b) pay all transportation and insurance charges for shipment of the Product to the ASP or Toshiba Exchange Center.

This manual is also suitable for:

Ik-df02a

Table of Contents