Pioneer 504CMX - PDP - 50" Plasma Panel Command Reference Manual page 11

RS-232C Adjustment Mode
Command name AJY (232C integrator) Display
MIR MIRROR MODE: ###
MIRS00 MIRROR MODE: OFF
MIRS01 MIRROR MODE: X
MIRS02 MIRROR MODE: Y
MIRS03 MIRROR MODE: XY
MNR MPEG NR: ######
MNRS00 MPEG NR: OFF
MNRS01 MPEG NR: LOW
MNRS02 MPEG NR: MIDDLE
MNRS03 MPEG NR: HIGH
MSC ###########
MSCS00 MULTISCREEN: OFF
MSCS01 MULTISCREEN: ON
MST ###########
MSTS01 2SCREEN
MSTS02 PinP DOWN RIGHT
MSTS03 PinP UP RIGHT
MSTS04 PinP UP LEFT
MSTS05 PinP DOWN LEFT
MSTS06 PoutP
MTN VIDEO MUTING: OFF
MTY VIDEO MUTING: ON
[O]
OMN ORBITER: OFF
OMY ORBITER: ON
[P]
PLN BRIGHT ENHANCE: OFF
PLY BRIGHT ENHANCE: ON
POF –
PON –
PUC PURECINEMA: ######
PUCS00 PURECINEMA: OFF
PUCS01 PURECINEMA: STANDARD
PUCS02 PURECINEMA: ADVANCE
[R]
R HIGH: ∗∗∗
RHI
R LOW: ∗∗∗
RLW
R SIDE MASK LEVEL: ∗∗∗
RSL
[S]
SFT SIGNAL FORMAT: ####
SFTS01 SIGNAL FORMAT:
VGAorXGAorSXGAor720PC
SFTS02 SIGNAL FORMAT:
WVGAorWXGAorSXGA+
SFTS03 SIGNAL FORMAT:
VIDEO 525p or VIDEO 750p
SFTS04 SIGNAL FORMAT: PC AUTO
SHARPNESS: ∗∗∗
SHP
SIM SIDE MASK MODE: ######
SIMS01 SIDE MASK MODE: NORMAL
SIMS02 SIDE MASK MODE: OVERLAY1
SIMS03 SIDE MASK MODE: OVERLAY2
SLN –
SLY STILL
9
Remarks
Displays the current MIRROR MODE setting.
Turns the MIRROR MODE OFF (normal display).
Sets the MIRROR MODE to left-right reversal.
Sets the MIRROR MODE to up-down reversal.
Sets the MIRROR MODE to up-down, left-right reversal.
Displays the current MPEG NR setting.
Turns MPEG NR OFF.
Sets MPEG NR to LOW.
Sets MPEG NR to MIDDLE.
Sets MPEG NR to HIGH.
Displays 2-screen display operation ON/OFF.
Turns the 2-screen display operation OFF.
Turns the 2-screen display operation ON.
Displays the current 2-screen operation type.
Sets 2-screen operation to 2 SCREEN.
Sets 2-screen operation to PinP (lower right).
Sets 2-screen operation to PinP (upper right).
Sets 2-screen operation to PinP (upper left).
Sets 2-screen operation to PinP (lower left).
Sets 2-screen operation to PoutP.
Turns OFF video muting.
Turns ON video muting.
Turns ORBITER OFF.
Turns ORBITER ON.
Turns the center brightness enhancement OFF.
Turns the center brightness enhancement ON.
Power OFF
Power ON
Displays the current PURECINEMA setting.
Turns PURECINEMA OFF.
Sets PURECINEMA to STANDARD.
Sets PURECINEMA to ADVANCED.
Adjusts R. HIGH.
Adjusts R. LOW.
Adjusts the RED side mask.
Displays the current SIGNAL FORMAT.
Sets the SIGNAL FORMAT to PC FORMAT 1
(VGA or XGA or SXGA or 720PC).
Sets the SIGNAL FORMAT to PC FORMAT 2
(WVGA or WXGA or SXGA+).
Sets the SIGNAL FORMAT to VIDEO 525p or VIDEO 750p.
Sets the SIGNAL FORMAT to PC AUTO.
Adjusts the SHARPNESS.
Displays the current side mask setting.
Sets the side mask setting to normal.
Sets the side mask setting to OVERLAY1.
Sets the side mask setting to OVERLAY2.
Turns the STILL setting to OFF.
Turns the STILL setting to ON.
RS-232C Numerical
Normal
Adjustment Direct
Validity
Validity Validity
¶
‡
‡
‡
‡
¶
‡
‡
‡
‡
¶ ¶
‡ ‡
‡ ‡
¶ ¶
‡ ‡
‡ ‡
‡ ‡
‡ ‡
‡ ‡
‡ ‡
¶ ¶
¶ ¶
‡
‡
‡
‡
‡ ‡
‡
¶
‡
‡
‡
‡ ‡
‡ ‡
‡ ‡
¶
‡
‡
‡
‡
‡ ‡
¶
‡
‡
‡
‡
‡