Heirloom Stitching; Hemstitching (1) (Daisy Stitch); Hemstitching (2) (Drawn Work (1)) - Brother NX-2000 Operation Manual

Heirloom Stitching

By sewing with a wing needle sold separately, the
needle holes are enlarged, creating a lace-like
decorative stitch.
This stitching is used to decorate tablecloths, hems, and
shirt fronts.

Hemstitching (1) (Daisy Stitch)

Note
For best results, use lightweight to medium weight
homespun fabrics with a slight stretch.
a
Insert a wing needle (130/705H, size 100/16).
Note
The needle threader cannot be used with a wing
needle. Manually pass the thread through the eye of
the needle from the front. If the needle threader is
used, damage to the machine may result.
b
Select a stitch, attach presser foot "N", and
then start sewing.
* Select a stitch between 3-01 and 3-22.
Drawn Work (1
CAUTION
• The needle threader cannot be used. Thread the wing
needle by hand, from front to back. Using the needle
threader may result in damage to the machine.
• A more attractive finish can be obtained if you use a
"130/705H Wing" needle when sewing these
patterns. If using a wing needle and the stitch width
has been set manually, check that the needle will not
touch the presser foot by carefully rotating the
handwheel before starting sewing.
Memo
For details on the stitches, refer to the "STITCH
SETTING CHART" at the end of this manual.

Hemstitching (2) (Drawn Work (1))

SEWING THE STITCHES
3
85