Setup Menu - Sharp Aquos LC-32D47UA Operation Manual

On-Screen Display Menu
Setup Menu
Example
1...., . . ...., .
....,1
....,8et=u p
=
- - - - - - l
EZ Setup
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode default setting.
Home:
"Power Saving" is set to "Off', and AV MODE is set to
"STANDARD".
Store:
"Power Saving" is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can
be set.
Picture Reset AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If
you select "On', AV MODE will be reset to "DYNAMIC
(Fixed)" if there is no operation for 30 minutes. When 'Off"
is selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo:
When "On" is selected, after all the settings
are completed, the Feature Demo screen is displayed if
there is no operation for several minutes.
• ENERGY STAR qualification is based on AV MODE
"STANDARD".
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable'.
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
• See "Initial Setup" on page 12 for setting each item.
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
20
CH Setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air). ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On:
Skips channels. (Channel selection disabled using
CH
A/Y.)
Off: Does not skip channels. (Channel selection enabled using
CHNY.)
Antenna Setup Digital: In order to receive digital air
broadcasts, you need a digital broadcast antenna.
You can confirm the antenna configuration through the
"Antenna Setup Digital" screen. If necessary, adjust the
direction of the antenna to obtain the maximum signal
strength.
Signal Strength: The signal strength of DIGITAL channel is
displayed. The signal infonnation is based on the current
channel.
Channel Strength: Input the 2-digit channel number to check
the signal strength of the selected channel. Make sure the
signal is strong enough for each channel.
• This function is available for DIGITAL (Air) only.
• see
"Initial Setup" on page 12 for setting each item.
• If no channel is found, confirm the
type
of connection made
with your TV and try channel search again.
Input Skip
This setting allows you to skip the
HOMI
or PC-IN Input
("Input 4 (PC)", "Input 5 (HOMI)', "Input 6 (HOMI)" and
"Input 7 (HOMl)") on the InputSelection operation.
Yes: Skips the input.
No: Does not skip input
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
../~
/
~/.
to select the new name for the input
mode.
• You cannot change labels if the INPUT SOURCE is TV.