Experiencing Hd Images; Using The Remote Control Unit - Sharp Aquos LC-32D47UA Operation Manual

QUICK REFERENCE
QUICK INSTALLATION TIPS Experiencing HD images
Using the Remote Control Unit
1T(5m)
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get HD
programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
Use the remote control unit by pointing it towards the
remote control sensor on the lV. Objects between the
remote control unit and the remote control sensor may
prevent proper operation.
• Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
• The remote control unit may not work properly if the remote
control sensor on the 1V is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the 1V, or operate the remote control unit closer to the
remote control sensor.
ED
• For information on updating to HD programming, ask your
cable/satellite service provider.
II
l
_.
o
0
i
POWER
JJ
indicator
~
'-'1---
POWER
m
:D
B) The POWER indicator on the front of the
television lights GREEN.
=
l....-_-...J,I---c::::J3 . . ,
AC outlet
I
• Place the 1V close to the AC outlet, and keep the power
plug within reach.
1
Attach your antenna to the back of the television.
(See page 9.)
2
Connect the AC plug for the television into the AC
outlet.
3
How to turn on the television for the first time.
A) Press
POWER
on the television.
ED
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
• Speakers cannot be detached from the 1V.
• 1V angle cannot be adjusted.
IMPORTANT:
The POWER indicator on the television should light GREEN
indicating you have power to the television.
If the POWER indicator on the television still does not light up,
press POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
8