Selection Of Blades; Housing The Allen Wrench - Hitachi CJ 18DSL Instruction Manual

English
2. Set the orbital position to "0"
NOTE:
When cutting use cutting fluid (oil base cutting
fluid) to prolong the blade's service life.

SELECTION OF BLADES

Accessory blades
To ensure maximum operating efficiency and
results, it is very important to select the appropriate
blade best suited to the type and thickness of the
material to be cut. Three types of blades are
provided as standard accessories. The blade
number is engraved in the vicinity of the mounting
portion of each blade. Select appropriate blades
by referring to Table 6.

HOUSING THE ALLEN WRENCH

It is possible to house the allen wrench on the base.
(See Fig. 25)
Base
18
Allen wrench
Fig. 25