Chapter 2
Cisco CMTS Configuration Commands
cable time-server
To enable the integrated time-of-day (ToD) server on the Cisco CMTS series, enter the cable time-
server command in global configuration mode. To disable the time-of-day server function, use the no
form of this command.
Syntax Description
This command has no keywords or arguments.
Defaults
Disabled
Command Modes
Global configuration
Usage Guidelines
Per the DOCSIS specifications, the ToD server uses the UDP protocol, so UDP minor servers must also
be enabled using the service udp-small-servers max-servers no-limit command.
Command History
Release
12.0(4)XI
Examples
The following example shows how to enable the time-of-day server:
router# configure terminal
router(config)# service udp-small-servers max-servers no-limit
router(config)# cable time-server
router(config)#
OL-1581-08
cable time-server
no cable time-server
Modification
This command was introduced.
Cisco Broadband Cable Command Reference Guide
cable time-server
2-285