Index Page Description Getting started Setting the temperature Ironing with steam “PulseSteam” function “Ultimate steam” function “Intelligent steam” function Ironing without steam Vertical steam Energy saving “eco” setting Auto shut-off Additional accessories Calc’n’Clean Automatic clean warning Rinsing the iron steam chamber Cleaning &...
▪ This appliance is to be connected and used in accordance with the information Description stated on its characteristics plate. ▪ This appliance must be connected to 1. Water tank an earthed socket. If it is absolutely 2. Removable iron pad necessary to use an extension cable, 3.
or (model dependent) : Getting started If the “steam ready” lamp (9) lights and steam is not released when pressing the trigger (15 or 16*), refill the water-tank. 1. Remove any label or protective covering from the soleplate. 2. Place the appliance horizontally on a solid, stable surface.
Setting the Ironing with steam temperature 1. Check the ironing instruction label on the 1. Turn the temperature selector (14) to the garment to determine the correct ironing required setting. temperature. 2. Set the amount of steam to suit your needs, 2.
In both cases, if you find that water is dripping 2. Press the steam button (16*). out of the soleplate, set the temperature Important: selector (14) to a higher position (take care • The steam hose (7) may get hot if you that the garment can be ironed on this are ironing for long periods.
Additional accessories 10-20 cm (model dependent) Fabric protection soleplate cover The fabric-protection soleplate cover is used for steam ironing delicate garments at maximum temperature without damaging them. Use of the soleplate cover also does away with the need for a cloth to prevent Energy saving shine on dark materials.
Calc’n’Clean ~ 2 h. ¼C Cleaning the Boiler To extend the life of your steam generator and to avoid any build up of scale, it is essential that you rinse out the boiler after several hours of use (approximately after 50 hours).
Rinsing the iron steam chamber Caution! Risk of burns! This procedure helps to remove scale particles out of the steam chamber. This cleaning procedure may be performed occasionally (approximately once a year), when after a long period of use with very hard water, scale particles start to come out of the soleplate.
Cleaning & Storing the appliance Maintenance 1. Always allow the appliance to cool down Always unplug the appliance from before storing it. the mains supply before carrying 2. Set the main power to the “0” position out any cleaning or maintenance and disconnect the mains cable.
Advice on disposal Guarantee conditions Our goods come in optimised packaging. The terms of the guarantee for this This basically consists in using non- appliance are in accordance with that contaminating materials which should be stated by our representative for the country handed over to the local waste disposal in which it is sold.
Trouble shooting Problem Possible causes Solution The steam • There is a connection • Check the mains cable, the plug generator does not problem. and the socket. come on. • The main power button / • Set the main power button / switch switch (12) is not switched to the on position “I”.
Page 15
• The steaming will not stop. • Contact an authorized technical service centre. If the above does not solve the problem, get in touch with an authorized technical service. You can download this manual from the local homepages of Bosch. * model dependent...
Page 16
Great Britain Bosch Customer Service Grand Union House Old Wolverton Road Milton Keynes MK12 5PT UK +44 (0)844 892 8923 IRL +353 (0)1450 2655 www.bosch-home.co.uk 002 TDS20..GB/06/12...