•
When setting the recording paper cover on the control panel, first insert the right and left
front corners under sections "X" of the control panel and put the cover into place. Make
sure that the main-panel harness and main-mic harness* are routed as shown below.
Control panel
"X"
Boss "Y"
Panel lock arm
Main-panel harness
• After securing the recording paper cover with the screws, be sure to route the main-panel
harness and the main-mic harness* through the groove provided on the recording paper
cover and then set the panel lock arm to keep those harnesses in place, as illustrated
below.
Main-panel harness and
main-mic harness*
Recording paper
cover
Boss "Y"
Control panel
Panel lock arm
Main-mic harness*
Boss "Y"
Main-panel harness
IV – 13
Recording paper cover
* Provided on the FAX355MC/
FAX375MC/FAX-525DT/FAX-525MC.
Recording paper
cover
Main-mic harness*