Hide thumbs Also See for ZDT110:

Advertisement

User manual
Dishwasher
ZDT110

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZDT110

  • Page 1 User manual Dishwasher ZDT110...
  • Page 2: Table Of Contents

    Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document.
  • Page 3: Safety Information

    Safety information In the interest of your safety and to ensure the ried out by inexperienced persons will cause correct use, before installing and first using the injury or serious malfunctioning. Contact appliance, read this user manual carefully, in- your local Service Force Centre. Always in- cluding its hints and warnings.
  • Page 4: Control Panel

    Installation or if the control panel, work top or plinth area are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine.
  • Page 5: Setting Mode

    Setting mode the appliance MUST be in setting mode. If a programme light is illuminated and End of The appliance is in setting mode when all programme light is illuminated with fixed light, programme lights are off and End of pro- the last performed programme is still set.
  • Page 6: Audible Signals

    Indicator lights End of programme indicator light Illuminates when the washing programme has ended. It also has added functions of visual signalling as: – the setting of the water softener, – deactivation/activation of the audible signals, – intervention of an alarm due to the malfunction of the machine.
  • Page 7: Washing Programmes

    Washing programmes Programme Cycle description Normal 65° Normal soil. Prewash Crockery and cutlery Main wash 2 intermediate rinses Final rinse 65°A30' Light soil. Main wash Crockery and cutlery Final rinse Normal soil. Prewash 50° Crockery cutlery Main wash 1 intermediate rinse Final rinse Any.
  • Page 8: Set The Water Softener

    salt function and other 1. Fill up the rinse aid dispenser with rinse aid. 2. Set the rinse aid dosage to position 2. additives: If you decide in future to use separated deter- there is no need to fill up with special salt or gents, we advise that you: rinse aid.
  • Page 9: Use Of Dishwasher Salt

    Adjusting the water hardness Use of salt Water hardness setting °dH °TH mmol/l manually electronically 11 - 14 19 - 25 1,9 - 2,5 level 3 4 - 10 7 - 18 0,71 - 1,8 level 2 < 4 < 7 <...
  • Page 10 Use of dishwasher salt CAUTION! Use only special salt suitable for dishwashers. Unscrew the cap. Only before filling with Using the funnel provided, salt for the first time, fill pour in the salt until the the salt container with wa- container is filled with salt.
  • Page 11: Filling With Rinse Aid

    Filling with rinse aid Open the lid. Fill up with rinse aid. The Clean up any rinse aid maximum level for filling is which overflows. Close indicated by "max" the lid and press until it locks. CAUTION! Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent).
  • Page 12: Loading Cutlery And Dishes

    Open the lid. Set the dosage level. (The Close the lid and press un- dose is factory set in po- til it locks. sition 4). Loading cutlery and dishes – Dishes and items of cutlery must not lie Sponges, household cloths and any object that inside one another, or cover each other.
  • Page 13 For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother-of- • Only wash stoneware in the dishwasher if it is pearls handles. specially marked as being dishwasher-safe by the manufacturer.
  • Page 14: Upper Basket

    Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be folded up- them starting from the rear positions; tilting them must be loaded in the up- wards.
  • Page 15: Use Of Detergent

    Use of detergent IMPORTANT! Observe the manufacturer’s dosing and stor- age recommendations. Only use detergents suitable for dishwashers. Open the lid. Fill in the detergent in Observe the dosing lev- compartment A. els. For programmes with pre- When using detergent Close the lid.
  • Page 16: Care And Cleaning

    • Water may appear on the sides and the door CAUTION! of the dishwasher as the stainless steel will When the washing programme has finished, it eventually become cooler than the dishes. is recommended that the dishwasher is un- plugged and the water tap turned off. Care and cleaning Cleaning the filters IMPORTANT!
  • Page 17: Environment Concerns

    Cleaning the spray arms 1. Unplug the appliance and then turn off the water. NEVER try to remove the spray arms. 2. Leave the door ajar to prevent the forma- tion of any unpleasant smells. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.
  • Page 18: Something Not Working

    household waste disposal service or the shop CAUTION! where you purchased the product. When a unit is no longer being used: • Pull the plug out of the socket. Packaging material • Cut off the cable and plug and dispose of The packaging materials are environmentally them.
  • Page 19 Fault code and malfunction Possible cause and solution The programme does not start. • The dishwasher door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the mains plug. • The fuse has blown in the household fuse box. Replace the fuse.
  • Page 20: Consumption Values

    The wash results are not satisfactory There are streaks, milky spots or a bluish coating on • Decrease rinse aid dosing. glasses and dishes Water drops have dries onto glasses and dishes • Increase rinse aid dosing. • The detergent may be the cause. Contact the de- tergent manufacturer’s consumer care line.
  • Page 21: Hints For Test Institutes

    Electrical connection Information on the electrical connection is given on the rating plate on the Voltage - Overall power - Fuse inner edge of the dishwasher’s door. Water supply pressure Minimum - Maximum 0,05 - 0,8 (MPa) Capacity place settings Max.
  • Page 22: Installation

    cup racks: position A Installation Water inlet hose with safety WARNING! Any electrical and/or plumbing work required to valve install this appliance should be carried out by a Connect the inlet hose to a water tap with an qualified electrician and/or plumber or compe- external thread of 3/4”.
  • Page 23: Drain Hose

    If the water inlet hose or the safety valve is WARNING! damaged, remove the mains plug immediately. The electrical cable for the safety valve is in the double-walled water inlet hose and is live. CAUTION! Therefore do not immerse the water inlet hose A water inlet hose with safety valve MUST only or the safety valve in water.
  • Page 24: Electrical Connection

    Electrical connection WARNING! The dishwasher must be secured against tilting. CAUTION! Therefore make sure that the counter it is fixed Safety standards require the appliance to be under, is suitably secured to a fixed structure earthed. (adjacent kitchen units cabinets, wall). Prior to using the appliance for the first time, This dishwasher is designed to be fitted under ensure that the rated voltage and type of supply...
  • Page 28 www.electrolux.com 156997241-00-022008...

Table of Contents