Cleaning The Scanner - Brother MFC-J220 Advance User Manual

Cleaning the scanner

a
Lift the document cover (1). Clean the
scanner glass (2) and the white plastic
(3) with a soft lint-free cloth moistened
with a non-flammable glass cleaner.
1
2
b
(MFC-J410W and MFC-J415W only)
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
1
2
A
3
When there is a
spot of dirt or
correction fluid
on the glass strip
the printed
sample shows a
vertical line.
Routine maintenance
Note
In addition to cleaning the scanner glass
and glass strip with a non-flammable glass
cleaner, run your finger tip over the glass
to see if you can feel anything on it. If you
feel dirt or debris, clean the glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
i
After the glass
strip is cleaned
the vertical line is
gone.
A
39