Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings; Scan To A Memory Card Or Usb Flash Memory Drive; Entering Scan Mode - Brother DCP-385C User Manual

Setting your changes as a
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
c
Press + to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press + to choose Yes.
c
Press Stop/Exit.
Printing photos from a memory card or USB Flash memory drive
Scan to a memory card
or USB Flash memory
5
drive

Entering Scan mode

When you want to scan to a memory card or
USB Flash memory drive, press
The LCD shows:
Scan to E-mail Scan to E-mail
Scan to Image Scan to Image
Scan to OCR Scan to OCR
Scan to File Scan to File
Scan to Media Scan to Media
SCAN
Press a or b to choose Scan to Media.
Press OK.
If you are not connected to your computer
only the Scan to Media selection will appear
5
on the LCD.
(See Scanning for Windows
in the Software User's Guide on the CD-ROM
for details about the other menu options.)
5
5
(Scan).
Scan a document Scan a document
directly to a media directly to a media
card or USB card or USB
flash flash
memory. memory.
Select & Press OK
® ®
or Macintosh
49
5