Mounting Instruction; Mounting The Main Unit - Fujitsu ECLIPSE CD8443 Owner's Manual

Mounting instruction

Mounting instruction
Note
Be sure to install the back strap to support the main unit. Failure
to install the back strap correctly may cause CD skipping.

Mounting the main unit

Insert the mounting sleeve into the opening in the vehicle
1
console.
Use a screwdriver or a similar tool to bend the tabs in the
2
mounting sleeve to secure the mounting sleeve.
DASH BOARD
OR CONSOLE
Attach the side brackets to the main unit using phillips
3
type screws.
MOUNTING
2
SLEEVE
124
BEND THE MOUNTING
TABS.
MAIN UNIT
1
PHILLIPS TYPE
9
SCREWS [ x 2 ]
(5 x 8mm)
3 SIDE BRACKETS [ x 2 ]