Selecting An Equalizer Mode From Memory - Fujitsu ECLIPSE CD8443 Owner's Manual

Selecting an equalizer mode from memory

Press a preset button to select the equalizer mode set in
memory for the button. The buttons that set equalizer modes in
memory are called preset buttons.
Turn the [SEL] button to select PEQ.
1
2 Press the [SEL] button.
Select any button, from [1] to [5], and press it for less
3
than two seconds.
The preset pattern stored in memory will be retrieved.
Press the [RTN] button.
4
At this time, other adjustments can also be made in pro
mode.
5 Press the [SOUND] button for less than one second to
exit sound adjustment mode.
When the preset value is changed, the display shows as follows:
ATTENTION
How to operate the Sound Adjustment Mode
Buttons [1] to [5]
P
1~5 (Preset ch No.)
91
[SOUND] button
[SEL]
button
[RTN] button