Download Print this page
Epson  Projectors with an HD-15 VGA Analog/Component Input Product Support Bulletin
Epson  Projectors with an HD-15 VGA Analog/Component Input Product Support Bulletin

Epson Projectors with an HD-15 VGA Analog/Component Input Product Support Bulletin

Projectors with an hd-15 vga analog/component input: elmo hv-110xg document camera and projector compatibility
Hide thumbs Also See for Epson Projectors with an HD-15 VGA Analog/Component Input:

Advertisement

Quick Links

EPSON
Date:
8/30/2007
PSB #:
PSB.2007.08.001
Reference:
N/A
Product(s): Epson Projectors with an HD-15 VGA Analog/Component Input
Subject:
Elmo HV-110XG Document Camera and Projector Compatibility
This bulletin was created to inform you of an operational issue with the Elmo HV-110XG
Document Camera when initially connected to an Epson projector.
Problem:
When attempting to use the Elmo HV-110XG Document Camera connected via the VGA HD15
connection to display content from its document bed. When connected to the projector, the
projector displays only the Blue Screen - No Signal message and will blink off and on or
display just the Blue Screen - No Signal message. When a computer is connected to the Elmo
HV-110XG Document Camera and switched to Pass-Through mode, the computer image is
displayed correctly by the projector. When switching back to the document table source of the
Elmo HV-110XG Document Camera, the problem returns. The Elmo HV-110XG Document
Camera puts out a Progressive Scan 20fps signal to the projector's VGA Analog port. This
signal is detected at 15 kHz Vertical and 291.8 kHz Horizontal frequencies which are beyond
projector sync specifications.
Solution:
With the Elmo HV-110XG Document Camera powered on and connected to the projector via
the VGA computer cable, access the Computer1/Computer2 setting in the projector menu
system and select the Component setting within the appropriate connection. This will allow
the Elmo HV-110XG Document Camera and projector to sync and the projector to display the
image of the document camera bed and its contents. However, the image will have a pink
cast. To eliminate the pink cast, change the projector setting from Component to RGB then to
Auto and exit from the menu. The projected image will now look normal. This will now allow
the Elmo HV-110XG Document Camera to sync and display the image properly to any other
connected Epson projector without having to change the projector settings.
P
S
RODUCT
UPPORT
B
ULLETIN
Page 1 of 1
Originator: DS
Authorization:
Total Pages: 1

Advertisement

loading

Summary of Contents for Epson Epson Projectors with an HD-15 VGA Analog/Component Input

  • Page 1 Auto and exit from the menu. The projected image will now look normal. This will now allow the Elmo HV-110XG Document Camera to sync and display the image properly to any other connected Epson projector without having to change the projector settings. Page 1 of 1...
  • Page 2 Cards tested: The following Compact Flash cards and adapters have been tested and added to the Extended Card Support Listing. Compact Card Make/Size Epson CF Adapter SimpleTechnology Adapter Epson 8MB Flash Card Supported Supported Lexar 32MB Flash Card Supported Supported...
  • Page 3 Extended Card Support Listing: Manufacturer Name of product Vol. Model number Adapter Adapter model name Supporting status Problem and Remarks manufacturer countermeasure Micro drive 340MB microdrive 340MB DMDM-10340 PC Card Adapter for IBM Supported microdrives Memory stick SONY MEMORY STICK 4MB MSA-4A SONY MSAC-PC1...
  • Page 4 Card type Manufacturer Name of product Vol. Model number Adapter Adapter model name Supporting status Problem and Remarks manufacturer countermeasure Compact EPSON CompactFlash Card 8MB 60045390 EPSON 60045400 Supported flash EPSON CompactFlash Card 8MB ECFA-08A EPSON 60045400 Supported EPSON CompactFlash Card 8MB...
  • Page 5 1.20 files cannot be opened or viewed by version 1.02 SlideMaker. File location: The file update is posted on Epson’s WEB site with this bulletin. Updating the software: The update utility Epson10316.exe is self-extracting program. Double-clicking the utility will...
  • Page 6 Reboot the system after the update is complete in order for the changes to take effect. Page 2 of 2...
  • Page 7 Windows folder: C:\WINDOWS\INF\OTHER. These are the file names: EPSONeasympstusb.inf (The prefix EPSON in the filename may or may not be listed) EPSONeasympstvxd.inf (The prefix EPSON in the filename may or may not be listed) 1.) To remove click on START, Programs, Windows Explorer.
  • Page 8: System Icon

    2.) On the System Properties screen, click on the tab Device Manager. Double click on the DISK DRIVES icon. Refer to Image # 2 below. 3.) Click on the EPSON ELP/EMP-715 icon. Click on the REMOVE button on the bottom of current screen. On the ‘Confirm Device Removal’ screen, click on the OK button.
  • Page 9 Image # 2 - Screen shot of... Device Manager/Disk drives Highlight and remove the “EPSON ELP/EMP-715 device”. Image # 3 - Screen shot of... Device Manager/Human Interface Devices Highlight and remove the “USB Human Interface Device”. Page 3 of 4...
  • Page 10 Image #4 - Screen shot of... Device Manager/Universal Serial Bus controllers Highlight and remove the “ELP/EMP-Series wdm Storage” and “Generic USB Hub”. Page 4 of 4...
  • Page 11 2.) The second driver to successfully install is: ELP\EMP-Series wdm storage. This driver automatically installs during the process from the provided Easy MP Software CD. 3.) The third driver that fails to install is: EPSON ELP/EMP-Series_wdm_storage. At the warning message, click Next and on the following screen click Finish to exit the process.

This manual is also suitable for:

Powerlite 505cPowerlite 715c