Hitachi CMP307XE User Manual page 8

Caution
You must to check the user manual of the computer when you connect to
the monitor.
Disconnect the power plug from the mains when you move the monitor.
When you disconnect the power plug.
Disconnect the power plug from the power point when you don't use the monitor
for a long time.
Do not put the monitor in atmosphere with soot, steam, high humidity, and dust.
Do not put the monitor in high temperature atmosphere.
Do not put things on the monitor.
Caution
Do not bundle the power cord.
Caution for 200 - 240V operation only
INFORMATIVE EXAMPLES OF PROTECTIVE DEVICES IN SINGLE - PHASE
Case A: Equipment to be connected to POWER SYSTEMS
with earthed neutral reliably identified, except for
Case C below.
Case B: Equipment to be connected to any supply, including IT
POWER SYSTEMS and supplies with reversible plugs,
except for Case C below.
Case C: Equipment to be connected to 3 - wire power
systems with earthed neutral reliably identified.
Verify that the protective devices in the building installation meets the conditions in the table prior to installing the equipment.
Remove the power cord for complete isolation!
6
EQUIPMENT OR SUB - ASSEMBLIES
Protection
against
Earth faults
Overcurrent
Earth faults
Overcurrent
Earth faults
Overcurrent
Minimum number
of fuses or circuit - Location
breaker poles
1 Phase conductor
1 Either of the two conductors
2 Both conductors
1 Either of the two conductors
2 Each phase conductor
2 Each phase conductor