Hints For Timer Recording; Timer Recording Using The Video Plus+ System - Hitachi DV-PF7UK Instruction Manual

RECORDING FUNCTION
For weekly recording: To record a TV programme at the
same time on the same channel every week. While the
month digit is flashing, press K or L repeatedly to select "W-
MO" (example: every monday).
5
For once-only recording only : Press K or L repeatedly
until your desired day appears.
6
Press K or L repeatedly until the relevant start hour
appears. Next, enter the minute digit.
7
Press K or L repeatedly until the relevant end hour
appears. Next, enter the minute digit.
8
Press K or L repeatedly until the relevant channel num-
ber appears.
9
Press K or L repeatedly until your the desired tape
speed appears.
10
Press K or L repeatedly to set PDC "ON" or "OFF".
• The Programme Delivery Control (PDC) is a very conve-
nient system which assures that the TV programmes you
have programmed for timer recording will be recorded
exactly from beginning to end (refer to page 21).
11
Press B. Programme 1 is now completed.
12
Press MENU to exit.
To set another timer programme, repeat steps
13
Press TIMER to activate the timer.
• TIMER light comes on.
• As REC light comes on, the DVD/VCR becomes
STANDBY status, and switches to DVD mode automati-
cally.
• When all timer recordings are finished, REC light will
flash. To use the DVD/VCR again as usual, press
TIMER to disable the flashing REC light, then press
DVD or VCR to choose DVD or VCR mode, then contin-
ue with the other features as described in this manual.

Hints for Timer Recording

• If there is a power failure or the DVD/VCR is unplugged
for more than 30 seconds, the clock setting and all
timer settings will be lost.
• If a tape ends during TIMER RECORDING, the
DVD/VCR will stop, eject the tape, and switch to the DVD
mode automatically as the REC light blinks. (If the DVD
power is off, the VCR will become STANDBY status).
• If a tape is not in the DVD/VCR or does not have a
safety tab, the REC light flashes and timer recording
will not operate. Please insert a recordable tape.
• When all timer recordings are finished, the REC light
will flash. To use the DVD/VCR again as usual, press
TIMER to disable the flashing REC light, then press
VCR to select the VCR mode. Select either VCR or
DVD mode, then continue with the other features as
described in this manual.
• When timer recordings are set, the REC light will come
on. To use the DVD/VCR as usual until the time for the
recording, press TIMER so that REC light disappears.
Press VCR to choose the VCR mode. Select either
VCR or DVD mode, then continue with the other fea-
tures as described in this manual.
• In timer standby mode, VCR feature does not function.
• To exit timer standby mode, press TIMER. The REC
light disappears and you can operate the VCR.
If you want to use the DVD/VCR during a VCR timer
recording or while the TIMER light is on or flashes.
• You can use the DVD/VCR while the REC light is on or
flashes, or during a timer recording. Press y y /I to turn
on the DVD/VCR. Press DVD on the remote control to
choose DVD mode, then continue with the other DVD
features as described in this manual. You don't have to
set the TIMER off to use the DVD only.
TO STOP AN AUTOMATIC TIMER PROGRAMME
ALREADY STARTED
Press C/A on the DVD/VCR.
TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC
TIMER PROGRAMME
1
Press TIMER.
• If the VCR's power is off, press y y /I instead of TIMER,
then go on to the next step.
• If the DVD output mode is selected, you have to switch
it to the VCR mode by pressing the VCR on the remote
control or the OUTPUT on the DVD/VCR.
2
Repeat steps 1 to 3 in the "Timer recording" section.
3
Select the programme number you want to check by
pressing K or L.
• The details of the selected programme appears on the
TV screen.
• Go to the digit you want to change by pressing s or B.
Then, enter correct numbers by pressing Arrow K or L.
• You may cancel the entire programme by pressing s
while the programme number flashes.
4
Press MENU to exit.
5
Press TIMER to return to timer stand-by mode.
TO AVOID OVERLAP OF TIMER PROGRAMMES
A timer programme will not work whilst another programme
3 to .
11
is under execution.
Programme 1
Programme 2
Programme 3
Timer Recording using the VIDEO Plus+
You can programme the timer using the PlusCode program-
VCR
ming numbers that are printed in TV guide magazine. You
can set eight programmes to record.
• Use the remote control for the this procedure.
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
1
Press the VIDEO Plus+ button.
If you have not set the clock yet,
"CLOCK" setting menu appears. If
so, follow the steps outlined in the
"Setting the clock" section. Then, set the timer.
2
Press the number buttons to set
the Plu Code number of the pro-
gramme you want to record.
• Press s to go back one digit
from current digit while you set the PlusCode number.
3
Select once, daily, everyday, or weekly recording.
For once-only recording:
Press the VIDEO Plus+ button.
For daily recording: To record a TV programme at the same
time on the same channel from Monday through Friday.
Press DAILY/WEEKLY repeatedly to select "DAILY (MO-
FR)", then, press the VIDEO Plus+ button.
For everyday recording: To record a TV programme at the
same time on the same channel every day. Press
DAILY/WEEKLY repeatedly to select "DAILY (MO-SU)", then,
press the VIDEO Plus+ button.
For weekly recording: To record a TV programme at the
same time on the same channel every week.
Press DAILY/WEEKLY repeatedly to select "WEEKLY", then,
press the VIDEO Plus+ button.
– 20 –
9:00 10:00 11:00
®
VIDEO Plus+ system
PlusCode No.
- - - - - - - - -
VIDEO Plus+ system
PlusCode No.
1 2 3 4 5 6 7 8 9
System
VCR
EN