Table of Contents
Advertisement
RECORDING FUNCTION
For daily recording:
To record a TV programme at the same
time on the same channel from Monday through Friday. While
the month digit is flashing, press K or L repeatedly to select
"MO-FR".
For weekly recording: To record a TV programme at the
same time on the same channel every week. While the
month digit is flashing, press K or L repeatedly to select "W-
MO" (example: every monday).
For everyday recording: To record a TV programme at the
same time on the same channel every day. While the month
digit is flashing, press K or L repeatedly to select "MO-SU".
5
For once-only recording only : Press K or L repeatedly
until your desired day appears.
6
Press K or L repeatedly until the relevant start hour
appears. Next, enter the minute digit.
7
Press K or L repeatedly until the relevant end hour
appears. Next, enter the minute digit.
8
Press K or L repeatedly until the relevant channel num-
ber appears.
9
Press K or L repeatedly until your the desired tape
speed appears.
10
Press K or L repeatedly to set VPS/PDC "ON" or "OFF".
• The Video Programme System (VPS) / The Programme
Delivery Control (PDC) is a very convenient system
which assures that the TV programmes you have pro-
grammed for timer recording will be recorded exactly
from beginning to end (refer to page 21).
11
Press B. Programme 1 is now completed.
12
Press MENU to exit.
To set another timer programme, repeat steps
13
Press TIMER to activate the timer.
• TIMER light comes on.
• As TIMER light comes on, the DVD/VCR becomes
STANDBY status, and switches to DVD mode automati-
cally.
• When all timer recordings are finished, TIMER light will
flash. To use the DVD/VCR again as usual, press
TIMER to disable the flashing TIMER light, then press
DVD or VCR to choose DVD or VCR mode, then contin-
ue with the other features as described in this manual.
Hints for Timer Recording
• If there is a power failure or the DVD/VCR is unplugged
for more than 30 seconds, the clock setting and all
timer settings will be lost.
• If a tape ends during TIMER RECORDING, the
DVD/VCR will stop, eject the tape, and switch to the DVD
mode automatically as the TIMER light blinks. (If the DVD
power is off, the VCR will become STANDBY status).
• If a tape is not in the DVD/VCR or does not have a
safety tab, the TIMER light flashes and timer recording
will not operate. Please insert a recordable tape.
• When all timer recordings are finished, the TIMER light
will flash. To use the DVD/VCR again as usual, press
TIMER to disable the flashing TIMER light, then press
VCR to select the VCR mode. Select either VCR or
DVD mode, then continue with the other features as
described in this manual.
• When timer recordings are set, the TIMER light will
come on. To use the DVD/VCR as usual until the time
for the recording, press TIMER so that TIMER light dis-
appears. Press VCR to choose the VCR mode. Select
either VCR or DVD mode, then continue with the other
features as described in this manual.
• In timer standby mode, VCR feature does not function.
• To exit timer standby mode, press TIMER. The TIMER
light disappears and you can operate the VCR.
If you want to use the DVD/VCR during a VCR timer
recording or while the TIMER light is on or flashes.
• You can use the DVD/VCR while the TIMER light is on
or flashes, or during a timer recording. Press y y /I to
turn on the DVD/VCR. Press DVD on the remote con-
trol to choose DVD mode, then continue with the other
DVD features as described in this manual. You don't
have to set the TIMER off to use the DVD only.
TO STOP AN AUTOMATIC TIMER PROGRAMME
ALREADY STARTED
Press C/A on the DVD/VCR.
TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC
TIMER PROGRAMME
1
Press TIMER.
• If the VCR's power is off, press y y /I instead of TIMER,
then go on to the next step.
• If the DVD output mode is selected, you have to switch
it to the VCR mode by pressing the VCR on the remote
control or the OUTPUT on the DVD/VCR.
2
Repeat steps
3
Select the programme number you want to check by
pressing K or L.
• The details of the selected programme appears on the
TV screen.
• Go to the digit you want to change by pressing s or B.
Then, enter correct numbers by pressing K or L.
• You may cancel the entire programme by pressing s
while the programme number flashes.
4
Press MENU to exit.
5
Press TIMER to return to timer stand-by mode.
TO AVOID OVERLAP OF TIMER PROGRAMMES
A timer programme will not work whilst another programme
is under execution.
Programme 1
3
to
.
11
Programme 2
Programme 3
S
V
HOW
SETTING THE GUIDE CHANNELS FOR THE
SYSTEM
First, make a table like below.
Then, referring to your local TV guide magazine or the TV
VCR
listings of your local newspaper, fill in the each boxes with
proper information.
• Write your local channel numbers in the "VCR Channel"
column, corresponding TV-stations in the "TV-Station"
column, and Guide channels in the "GUIDE Channel"
column. Then continue with the other features as
described in this manual.
GUIDE
Channel
– 20 –
1
to
3
in the "Timer Recording" section.
9:00
10:00
Guide Channel Set
®
IEW
TV-Station
11:00
VCR
S
V
HOW
IEW
VCR
Channel
EN
Advertisement
Table of Contents
