Hitachi L300P Series Quick Reference Manual page 27

Func.
Code
B084 Initialization mode (parameters or trip history)
• 00 Trip history clear
• 01 Parameter initialization
• 02 Trip history clear and parameter initializa-
tion
B085 Country code for initialization
• 00 Japan version
• 02 US version
B086 Frequency scaling conversion factor
B087 STOP key enable
• 00 Enable
B088 Restart mode after FRS
• 00 Restart from 0Hz
• 01 Restart from frequency detected from
actual speed of motor
B090 Dynamic braking usage ratio
B091 Stop mode selection
B092 Cooling fan control
• 00 Fan always ON
• 01 Fan ON during Run, OFF during Stop
B095 Dynamic braking control
• 00 Disable
• 01 Enable during RUN only
• 02 Enable always
B096 Dynamic braking activation level
B098 • Thermistor for thermal protection control
• 00 Disable
• 01 Enable – PTC thermistor
• 02 Enable – NTC thermistor
B099 Thermal protection level setting
B100 Free-setting V/f frequency (1)
B101 Free-setting V/f voltage (1)
B102 Free-setting V/f frequency (2)
B103 Free-setting V/f voltage (2)
B104 Free-setting V/f frequency (3)
B105 Free-setting V/f voltage (3)
B106 Free-setting V/f frequency (4)
B107 Free-setting V/f voltage (4)
Name / Description
• 01 Europe version
• 03 (reserved)
• 01 Disable
25
Default
Value Set
–FE2/–FU2/ Value
–FR
00
01 / 02 / 00
1.0
00
00
00
00
00
00
360/
720
00
3000
0.
0.0
0.
0.0
0.
0.0
0.
0.0