Secton - Configuraton
This section will show you how to configure your new D-Link NVR using the Web-based Configuration Utility.
To access the configuration utility, click the NVR name or IP on the NVR.Search.Utility or manually open a web-browser
(Internet Explorer only) and enter the IP address of your NVR.
The Login screen will appear:
Type "admin" in the user name field and
leave the password.blank.by default.
When logging into the NVR for the first time, you will be asked to choose a drive configuration type and format the
drives. There are four options: Standard, JBOD, RAID.0 and RAID.1. Standard configures each disk as a separate
volume, while JBOD combines both disks into a single volume. See page 42 for more details on using the RAID
configurations.
Note: Refer to page 40 for instructions on how to change the password of your admin account.
D-Lnk DNS-722-4/DNS-726-4 User Manual
Login
Click.Login