Network Setup - D-Link DNS-726-4 - Network Video Recorder Standalone DVR Product Manual

Secton  - Configuraton
The Network settings for your NVR can be configured on this page.
DHCP:
Select this connection if you have a DHCP
server running on your network and would
like a dynamic IP address to be automatically
updated to your NVR.
Static IP:
You may obtain a static or fixed IP address
and other network information from your
network administrator for your NVR. A static
IP address will simplify access to your NVR
in the future.
IP Address: The fixed IP address.
Subnet Mask:
The default value "255.255.255.0" is used to
determine if the destination is in the same
subnet.
Gateway IP
The gateway forwards frames to destinations
Address:
in a different subnet. Invalid gateway settings
may cause the failure of transmissions to a
different subnet.
DNS1:
Primary domain name server that translates
names to IP addresses.
DNS2:
Secondary domain name server to backup
the primary one.
PPPoE Enable this setting if your ISP (DSL service)
Settings:
is using PPPoE. You may already have a
Username and Password provided by your
ISP, or you may need to contact your ISP.
The connection status will be determined
automatically by the system.
D-Lnk DNS-722-4/DNS-726-4 User Manual

Network Setup

2