Connection
Caution: Please turn off all the equipment power before connecting.
Connect to the TV
Connecting diagram
Terminal board for the DVD player
DIGITAL OUTPUT
VIDEO
MONITOR
VCR SCART INPUT
COAXIAL
OPTICAL
DVD S-VIDEO
TV SCART OUTPUT
Connections to TV
Connecting the Speakers
Connecting the Antenna
Tighten the antenna rod
clockwise on the base of
the antenna.
CONTROL CABLE
TV
* The antenna should be connected to the antenna socket, tighten the
antenna by hand or tool. (Please note: Do not overtighten, this could
damage the antenna or it's fittings.)
* Put the antenna until you have the best reception.
Note: The antenna gets magnetism. Please don't put the antenna to
get colse to the object which is easy to be magnetized, such as
TV, computer ect.
- 3 -
Safety precautions
Some settings should be made for the unit
according to the TV connection.
* According to the color system setting of TV,
select the color system in the "TV Display"
function setting.
* If the unit is connected to wide screen TV, then
set "TV display" to "Wide" in the function setting
item.
* If the unit is connected to normal TV, then set "TV
display" to "Normal/PS" or "Normal/LB" in the
function setting item.
Connect the speaker cords between the terminals
as shown below.
Connect the cords with a silver line to the (+) (L) (R)
terminals and cords with a gold line to the (-) (G)
terminals.
Connection precautions
1. This unit has a high power output and wide
dynamic range. If speakers other than those
supplied are used, they must be chosen
according to speaker specification, or the
speakers may be damaged.
2. Before connecting or removing mains power,
please turn off the power on the unit and turn
the volume to minimum or it may damage the
speakers.