Connecting Control Cable; Connect To The Amplifier With Digital Signal Input Terminal; Connect To The Vcr; Connecting The Ac Power Cord - Hitachi AX-M140 Instruction Manual

Connecting Control Cable

Connect to the amplifier with digital signal input terminal

DVD player connections
DIGITAL OUTPUT VIDEO
MONITOR
VCR SCART INPUT
COAXIAL
OPTICAL DVD S-VIDEO
TV SCART OUTPUT
With digital signal input terminal's DTS,
Dolby Digital signal decode amplifier
With digital signal input terminal's DTS, Dolby
Digital signal decode amplifier terminal board

Connect to the VCR

Terminal board for the DVD player
DIGITAL OUTPUT VIDEO
MONITOR
VCR SCART INPUT
COAXIAL
OPTICAL DVD S-VIDEO
TV SCART OUTPUT
With VCR signal input terminal's
amplifier terminal board

Connecting the AC Power Cord

Insert the AC power cord into a wall outlet, and your system is ready for use.
Caution: Be sure to unplug the power cord from the outlet when going away or when the system is not
in use for an extended period of time.

Connect the Headphone

Connect a pair of headphones to the phone jacks. No sound comes out of the speakers.
Note: Be sure to turn down the volume before connecting or putting on headphones.
CONTROL CABLE
CONTROL CABLE
With VCR signal input
terminal's amplifier
With the unit unplugged from the mains connect
the power control cable to the DVD player, MP3
player, the amplifier and the radio via the connec-
tions on the rear of the units as shown .
Connection precautions
Please note: You can only use coaxial or optical,
they can not be used at the same time.
- 4 -