Getting to know your O!PLAY MEDIA PRO
System requirements
•
High-definition TV (HDTV), standard TV, or HDMI monitor
•
Storage device (USB flash drive / USB HDD)
•
Memory card (SD/MMC)
• Use the bundled Mini-HDMI cable to connect your MEDIA PRO to an HDTV
• Use the bundled composite AV cable to connect your MEDIA PRO to a
Front panel
LED indicator
Displays the status of the MEDIA PRO.
LED
1
Power
USB 2.0 port
2
Connect a USB 2.0 device into this port.
SD/MMC combo card slot
3
Insert a SD/MMC card into this slot.
Reset Button
4
Use a pin or a paper clip to press this button to reset the device to its factory
default settings.
IR (Infra-red) Receiver
5
Allows you to control the MEDIA PRO using the IR remote control.
1-4
e7276_oplays3_contents.indb 4
or HDMI monitor.
standard TV.
USB
1
2
Status
OFF
The device is turned off.
Orange
The device is in standby mode.
Blue
The device is turned on.
SD/MMC
3
4
5
Description
Chapter 1: Getting started
4/5/12 3:31:30 PM