Table of Contents
Advertisement
On confirmation, select OK to save settings or CANCEL to discard changes.
Connecting to your local area network (LAN)
To connect to your local area network (LAN):
1.
Connect one end of the RJ-45 cable to your LAN and the other end to the
Ethernet port at the back of your MEDIA PRO.
2.
Connect devices to your MEDIA PRO.
Follow steps 4-5 in the previous section Connect to your network.
3.
• If you select DHCP IP (AUTO), key in the DNS server's IP address. The
DNS server automatically assigns an IP address for Media Pro.
• If you select FIX IP (MANUAL), key in the IP address and Subnet Mask.
4. On the confirmation message, select OK to save settings or CANCEL to discard
changes.
5. On your computer, you may manually configure the IP settings.
ASUS O!PLAY MEDIA PRO
e7276_oplays3_contents.indb 3
• On your computer, you may manually configure IP address settings.
• For more details, refer to the section Configuring the network clients in this
chapter.
MEDIA PRO. .
For more details, refer to the section Connecting devices to your
Set-Top-Box
in Chapter 1.
• You may use the Fix IP address default settings:
• IP Address: 192.168.0.2
• Subnet mask: 255.255.255.0
• You may also obtain the IP address and subnet mask from your Internet
Service Provider (ISP).
• The IP addresses of your HD media player and your computer should be
unique, but in the same workgroup and subnet.
in the same workgroup and subnet.
• If you cannot connect to your LAN, contact your network administrator.
• If you want to access files found on a PC, ensure that the computer's files are
If you want to access files found on a PC, ensure that the computer's files are
shared on the network. Fore more details, refer to the section Sharing files
over the network in this chapter.
For more details, refer to the section Configuring the network clients in this
chapter.
MEDIA PRO. .
Media Pro. .
Smart TV
discard
2-3
4/5/12 3:31:51 PM
Advertisement
Table of Contents
