Epson Stylus Photo RX600 User Manual page 132

Error Message
Service required. Parts inside your
printer are at the end of their service life.
See your printer's documentation for
details.
The file size is too large to print.
The file is too complex to print.
Due to an error in the file, the document
cannot be printed.
External device is not connected or
storage media is not inserted. Canceling
backup.
Can not perform backup. Insufficient
memory on the memory card or media
to be used for backup.
Backup Error. Backup canceled.
The memory card or disk was removed.
Canceling backup.
Memory card is not preset. Canceling
backup.
Backup stopped
132
Solving Problems
Solution
Contact your dealer.
The file is too large to be printed via
Bluetooth. Check and adjust the file.
The file is too complex to be printed via
Bluetooth. Check and adjust the file.
There is a problem with the file that is
being sent. Check and adjust the file.
Check the connections, then load a
memory card or storage media and retry
the backup procedure.
There is not enough free space on the
storage media you are using. Load new
media that has enough space, then retry
the backup procedure.
An error has occurred while backing up.
Retry the backup procedure. If the error
happens again there may be problems
with your file. Check and adjust the file,
if necessary.
The memory card or storage media was
removed during the backup procedure.
Load a memory card or storage media,
then retry the backup procedure.
No memory card has been loaded. Load
a memory card. See "Inserting and
Removing Memory Cards" on page 80.
An unspecified problem has forced the
backup to stop. Reload the memory card
or storage media, then retry the backup
procedure.