Copying
You can use your Stylus Photo RX600 by itself, just like a photocopier, or copy
with a computer using the Epson Smart Panel software.
"Copying Without a Computer" below
"Copying With a Computer" on page 29
Copying Without a Computer
1. Press the P
On
2. Open the scanner lid.
3. Place your photo or document face down on the glass in the upper left corner
about 0.1 inch from the edges, as shown.
Move the photo
or document in
about 0.1 inch
from the edges
4. Close the scanner lid.
button to turn on the Stylus Photo RX600.
0.1 in
0.1 in
21