Craftsman 113.170340 Owner's Manual page 7

6. Insertthe push button end of the "Pos-I-
Lock" hose into the inletof the vac. The
hose should snap into place.To remove
the hosefrom the vac, pressthe release
button in the hoseassemblyand pull the
hose out of the vac inlet, as shown.
7. Placethe utility nozzle securely on the
opposite end of the hose and the vac is
ready for use.
NOTE: The opposite end of the hose is
removableif more hoses need to be
attached for more length from the vac. To
remove the swivel portion of the hose,
grasp the hose swivel and firmly pull it out
of the flexible hose. Connect the soft end
of a second hose (accessory#9-17820)
Cord Wrap
into the swivel end of the original hose by
forcing the sections together until they fit
tightly. - OR -
Purchase a 9-16917 hose-hose connec-
tor. Install the hose-hose connector on the
end of the hose connected to the vac and
connect the other hose to the hose con-
nector.
Rele,_se Press and
Button Pull
E:3>
Blowing
Vacuum
Ud
Port
Handle
lease
Button
Swivel
Drum End
Drain
Larger
Opening
Pov_er
Assembly
Hose
Open
Of Hose
Hose
Lock
To Store Your Accessories
1. Slide extension handles and accesso-
ries into the slotted areas of the
caster feet for storage.
2. To remove the accessories, rotate and
pull upward.