Brother BES Monogramming Suite Instruction Manual page 46

44 Pacesetter BES Monogramming Suite
Instruction Manual
 Check the Flip horizontal box.
 Check the Flip vertical box.
You can also make these changes - that is, flip or scale the
individual decors - after you have added all the desired decors
to the preview of the monogram. Do this by selecting them
individually with the Select
4 Repeat steps 1–3 to add more decors in the other positions.
If you want to add the same decor design more than once,
select and place first decor as described above. Then, hold
down the CTRL key while clicking the next placeholder; the
Monogram Designer will retain your original selection and
apply it to all subsequent placements.
5 When you have added all the decors required, click OK.
The completed design appears in the workspace.
Note: Monogram Designer Preview
The arrangement of lettering and frames in a design will be
affected by any decors that are placed into it. When the
monogram is generated, it will be centered and will fit tightly
within the frame, ignoring any "unused" decor positions.
This will be relevant if, for example, a decor is placed on one
side of the monogram, and not on the other. In such a case, the
preview in the Monogram Designer will not look exactly the
same as when it is generated in the main Workspace window,
since it is still taking into account the decor placeholders.
So, in order to preview the design as it will generate, place the
decors you want, and then uncheck the Decors box. This will
remove any unused placeholders, and change the preview to
show all the elements of the design correctly arranged.
You can also check the 1:1 box to show the lettering, frames
and decors in actual size.
tool.