Fujitsu TeamPoS 7000 User Manual page 14

1.2.12.1
Button
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Chapter 1 - Overview
12 - AIO Peripherals
7000 Front Panel Switch and LCD Matrix
TeamPoS
Button/LED
Reset
switch
Volume
Down
Volume
Brightness
Down
Brightness
HDD/SSD
activity
5V Standby
(MB power)
Unused
LED
Memory
Diagnostic
Diagnostic
HDD2/SSD2
Diagnostic
HDD1/SSD1
Diagnostic
Caution: It is assumed that the user of this manual fully understands and
strictly adheres to proper Electrostatic Discharge (ESD) precautions. Failure
to adhere to precautions can cause damage to this equipment.
Always remove the power cord from the unit prior to performing any system
maintenance.
Position Comment
Between Resets system; all data in
LEDs and memory will be lost.
buttons
Leftmost Press to decrease speaker
button volume.
Second Press to increase speaker volume.
Up from left
Second Press to decrease monitor
from right brightness.
Rightmost Press to increase monitor
Up button brightness.
Leftmost This LED flashes to indicate
LED HDD/SSD read/write activity.
Second Indicates that AC power is
from left supplied to the power supply and
standby voltages for the
motherboard are available.
Third from Unused.
left
Middle This LED is illuminated when
LED the BIOS memory test detects a
memory error.
Fan Third from This LED is illuminated when
right the BIOS detects a fan failure (all
models except A100).
Second This LED is illuminated when
from right HDD2/SSD2 is not detected.
Rightmost This LED is illuminated when
LED HDD1/SSD1 is not detected.
TeamPoS7000_User Guide_D900000454.pdf
TeamPoS
7000 User Guide