Chapter 4. Daily Maintenance; Cleaning The Equipment; Cleaning The Main Unit - Fujitsu TeamPoS 7000 User Manual

This chapter describes how to clean the equipment and replace consumables.

4.1 Cleaning the Equipment

The following cleaning operations must be performed as required in order to ensure reliability.

4.1.1 Cleaning the main unit

Wipe the surface with a soft cloth such as gauze that has been moistened with neutral detergent.
The red rectangles in following illustrations show the ventilation holes on the A100 and A200/
A300 models. These holes must be kept clean and remain unobstructed in order to prevent
excessive internal temperatures.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
TeamPoS7000_User Guide_D900000454.pdf
Revision 1.0 - March 6, 2012
Daily Maintenance
NOTE: Observe the following cautions when cleaning the equipment.
• Switch off the equipment before cleaning.
• Use a solution of mild detergent diluted in water to clean the exterior
surfaces.
• Do not use a wet or chemically treated cloth or volatile chemicals
such as paint thinner to clean the equipment. Doing so may damage
the surface.
A100
Caution:
When cleaning, never spray any liquids directly onto the unit.
Always spray onto a cleaning cloth and then wipe to clean.
A200/A300
Chapter 4 - Daily Maintenance
Cleaning the Equipment - 31
4