Fujitsu ETERNUS DX Disk User Manual page 4

Preface
The Contents and Structure of this Manual
This manual is composed of the following 11 chapters and an appendix.
"Chapter 1 Workflow " (page 11)
•
This chapter describes how to connect the ETERNUS DX Disk storage systems to a server running Linux.
• "Chapter 2 Checking the Server Environment" (page 15)
This chapter describes which servers can be connected to ETERNUS DX Disk storage systems.
"Chapter 3 Notes " (page 17)
•
This chapter describes issues that should be noted when connecting the ETERNUS DX Disk storage systems
and server.
"Chapter 4 Installing and Setting Up ETERNUSmgr" (page 20)
•
This chapter describes how to install ETERNUSmgr.
"Chapter 5 Setting Up the ETERNUS DX Disk Storage System" (page 21)
•
This chapter describes how to use ETERNUSmgr to set up the ETERNUS DX Disk storage systems.
"Chapter 6 Setting Up the Fibre Channel Switches " (page 22)
•
This chapter describes how to set up the Fibre Channel switches.
• "Chapter 7 Installing Drivers and Setting Up the Server" (page 24)
This chapter describes how to install the Fibre Channel card drivers and set up the server.
"Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems " (page 25)
•
This chapter describes how to connect the server and ETERNUS DX Disk storage systems.
"Chapter 9 Setting Up the Server to Recognize the Logical Units " (page 26)
•
This chapter describes how to make the server recognize the LUNs of the ETERNUS DX Disk storage system.
"Chapter 10 Setting Up and Checking the Multipath Driver" (page 29)
•
This chapter describes how to set up and check the ETERNUS Multipath Driver.
"Chapter 11 Setting a File System" (page 30)
•
This chapter describes how to create a file system.
The restoration procedure for when a path degrades in a VERITAS Volume Manager environment is described
in the appendix.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
4
Copyright 2013 FUJITSU LIMITED
P3AM-3842-12ENZ0