Epson Stylus CX9475Fax Start Here Manual page 11

2. Secure the print server to the back of the all-in-one using the included hook-
and-loop self stick tape. The antenna should be on left as shown below:
Install Software and Set Up the Print
Server
®
Your software works with Windows XP, XP Professional x64 Edition, and
®
Windows Vista 32- and 64-bit.
Follow the instructions in this section to set up the CX9475Fax for use on a
network. If you're installing the all-in-one in an Ad Hoc environment, see
"Configuring the Print Server and Installing Software for Ad Hoc Mode" on
page 15.
Before you start, make sure your network is set up and working correctly. Then
follow the instructions below to install the drivers and configure the print server.
11
Install Software and Set Up the Print Server